2V-26V DC MT3608 MicroUSB Step Up Boost Voltage Regulator Power Supply Module US

Description

2V to 26V Adjustable Output 2A DC-DC MT3608 Step Up Boost Power Supply Voltage Regulator With Micro USB Input Connector
Generate up to 26V DC power from a standard 5V USB input! This MT3608 step up / boost power supply module is similar to our
MT3608 module with standard solder pads for the DC input
. But this model features a Micro USB input connector, so the module can be easily powered by simply plugging it into a standard 5V USB power supply or power bank. In addition, it includes input solder pads, so it can also be powered by any 2V to 24V DC power supply.
The MT3608 Boost DC-DC voltage regulator is a constant frequency, current mode step-up converter intended for small, low power applications. The MT3608 device switches at 1.2MHz and allows the use of tiny, low cost capacitors and inductors to minimize the overall module size. Internal soft-start circuitry results in small inrush current and extends battery life.
The MT3608 features automatic shifting to pulse frequency modulation (PFM) mode at light loads. The MT3608 includes under-voltage lockout, current limiting, and thermal overload protection to prevent damage in the event of an output overload.
MT3608 Step Up Boost Power Supply Regulator Specifications:
Input voltage: +5V USB, or 2VDC ~ 24VDC
Maximum output voltage: 26V
(Output voltage must be greater than input voltage)
Maximum output current: 2A
Maximum output power (Volts * Amps): 10 Watts
Maxiumum efficiency: Up to 97%, typically 93% at Vout=12V, Vin=5V, Iout=200mA
Dimensions: 30 x 17 x 7 mm (1.2 x 0.7 x 0.24 inches)
Operating Instructions:
Connect the module to a +5V USB power supply or USB power bank through the micro USB connector, or attach Vin+ and Vin- to a +2V to +24V DC power supply.
Connect the Vout+ and Vout- to an appropriate load.
Adjust the potentiometer to vary the output voltage. Turn counter-clockwise to increase voltage. Upon initial operation, several counter-clockwise turns of the pot are needed to achieve a boosted output voltage.
Input voltage should not exceed the 24V.
Output voltage should not exceed the 26V.
Output voltage level must be greater than input voltage level.
Peak output current should be limited to 2A maximum and output power should be limited to 10 Watts.
Note:
The laws of physics apply to this module. The input power must be greater than the output power, plus ~10% for conversion losses. For example, if your output requirement is 12V at 1/2A (6W), and your input voltage is 3V, then the input current must be at least 2.2A: 6W / 3V = 2A + 10% = 2.2A input current.
Package includes
:
1X MT3608 Micro USB Step Up Boost Power Supply Regulator
Specifications and usage documentation
Get it faster! Ships in 1 business day from our Colorado office for quick US delivery.
See also our MT3608 Step Up Power Supply Module with solder pad input connectors:
MT3608 Step Up Power Supply Module with solder pad input connectors
We provide FREE USPS First Class Shipping with Tracking - Not Economy Shipping