DSP-101 Software Defined Radio SDR Radio Receiver FM/AM/LW/MW/SW/AIR-Band DSP

Description

Product Description
If you have any questions, please contact customer service first, do not open disputes easily, thank you!
Features:
The DeepSDR 101 is a DSP digital demodulation radio based on the SDR software defined radio architecture. Featuring a 192kHz wide spectrogram and waterfall display capability with 16bit sampling for a highly dynamic receiver with CW, AM, SSB and FM demodulation. The whole unit is housed in a full aluminium CNC casing with a 4.3" 800x480 resolution high brightness IPS LCD display, while maintaining a small and compact body.
Take it outdoors immediately and enjoy nature and listening anywhere, anytime!
Specifications:
Display technology: 4.3" IPS 800x480 resolution DC dimmable high brightness LCD
Control method: Resistive touch screen + rotary encoder
Frequency range: 100k - 149MHz
Operating modes: CW, AM, SSB single sideband (LSB/USB), WFM, FM radio stereo (headphones required)
Step frequency: 1Hz/10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz
Spectrum bandwidth: 192kHz, 128kHz, 64kHz, FFT real time spectrum display
Antenna interface: BNC male, impedance 50Ω, maximum input power -20dBm
Reference crystal: TCXO 26MHz ±0.5ppm
Audio interface: support ordinary 3.5mm headphones or CTIA (American Standard) interface headphones
Speaker power: Maximum 3W, 4Ω multimedia speaker horn
Charging port: USB Type-C, 5.0V/2A
Current consumption: approx. 250mA @ 5V
Battery capacity: 5000mAh/3.7V, 18.5Wh
Usage time: approx. 10-12 hours, depending on machine volume and brightness settings
Channel saving: 99 preset channels, preset station name, station frequency and demodulation method
Main body size: 140 x 74 x 22mm (L x W x H) (no protrusions)
Body weight: approx. 315g (main unit only)
Package weight: 415g Package size: 19*10.5*4.5cm
Receiver parameters:
RF preamplifier gain: fixed 20dB
Circuit Type: Zero Intermediate Frequency ZIF
Sideband rejection: ≥50dB
Package includes:
SDR 4.3" IPS screen main unit*1
USB Type-C data cable*1
BNC 7-section trolley antenna*1
Instruction manual*1
Touch pen*1
Caution:
1.This machine adopts SDR architecture, if you have a strong broadcast transmitter nearby, there may be a crosstalk/mirror station phenomenon, please
Please be aware of this.
2.The input impedance of the antenna interface is 502, for medium wave radio stations, it is recommended to connect a special medium wave loop antenna to get better listening
Please note
3.Please pay attention to the volume setting of the headphones (EAR) before listening, to prevent discomfort caused by excessive volume.
About Us
We accept all payments authorized by eBay.
About Us
We accept all payments authorized by eBay.
powered by