-40%
Plug and Play 4S 100A 12v 16.8v Li-ion Lithium BMS Battery Balance No Soldering
Plug and Play 4S 100A 12v 16.8v Li-ion Lithium BMS Battery Balance No Soldering
Plug and Play 4S 100A 12v 16.8v Li-ion Lithium BMS Battery Balance No Soldering
Plug and Play 4S 100A 12v 16.8v Li-ion Lithium BMS Battery Balance No Soldering
Plug and Play 4S 100A 12v 16.8v Li-ion Lithium BMS Battery Balance No Soldering
Plug and Play 4S 100A 12v 16.8v Li-ion Lithium BMS Battery Balance No Soldering

Plug and Play 4S 100A 12v 16.8v Li-ion Lithium BMS Battery Balance No Soldering

$ 14.77

Availability: 20 in stock
  • Nominal Power Rating: 1200W
  • Brand: APEX
  • Output Voltage Rating (DC): 16.8v
  • Return shipping will be paid by: Buyer
  • Input Voltage Range: 12V - 16.8V
  • Country/Region of Manufacture: United States
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted
  • Inrush Current Rating: 60 A
  • Minimum Operating Temperature: -40 °C (-40 °F)
  • Maximum Operating Temperature: 85 °C (185 °F)
  • Nominal Voltage Rating (AC): 12 V
  • Nominal Voltage Rating (DC): 12 V
  • Maximum Continuous Output Current: 100 A
  • Color: White
  • Output Voltage Range: 12V - 16.8V
  • MPN: Does Not Apply
  • Charging voltage: 16.8V
  • Nominal Current Rating: 100 A
  • Size: 6cm x 4.2cm
  • Current Conversion: DC to DC
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Custom Bundle: No
  • Maximum Peak Output Current: 100 A
  • Type: BMS
  • Condition: New
  • Restocking Fee: No

    Description

    Note: This BMS is a custom model that comes pre assembled for easy install (no soldering needed) and is for
    Lithium-ion (Li-ion)
    and certain
    Lithium-polymer (LiPo)
    batteries.
    LiFePO4
    based BMS boards are in my other listings.
    Description:
    This BMS balance board is used for a lithium battery pack to equalize voltage and protect the cells. This module charges, discharges, balances, and acts as a low voltage/over charge cutoff.
    We have pre installed a screw based connection block for the easy connection of balance wires to the BMS.
    The BMS is assembled to use a COMMON Port setup for both charge and discharge at 60A (continuous) and discharge at 100A (burst).
    The following is the BMS parts list:
    (1) BMS Board
    Lithium-ion (Li-ion), Lithium-polymer (LiPo)
    (2) Ring Terminal Connectors M3,
    8-16AWG Wire
    Compatibility
    (2) Ring Terminal Screws and Washers
    (1) Pre-installed balance wire connection block, 16-24AWG Wire Compatibility
    *Wires are not included. Balance wires of 16-24AWG will fit in the balance connection terminal and primary wires of
    8-16AWG can be used in the ring connectors. Larger gauge primary wires can be used with larger ring connectors or solder points.
    Battery compatibility: Voltage of 2.5V - 4.2V lithium battery (18650, 26650, LiPo, Li-ion)
    Charging input voltage: 16.8V
    Maximum starting current: 100A
    Maximum
    continuous current: 60A
    Charge current: 60A
    Maximum
    continuous
    current (additional solder point): 100A
    Board Size: approx. 42*60*7.4mm
    Package includes: 1 x
    Li-ion Lithium
    Battery Protection Board
    Condition is New. Shipped with USPS First Class.